Sony KP 53V85 - Manuel (Page 21)

– 21 –
KP-48V85/53V85/61V85
RM-Y905 RM-Y905 RM-Y905
30
Using Your New Projection TV (continued)
(white labeled
button)
(white labeled button)
(white labeled
button)
Press to display right (main) and left (sub) pictures.
Press again to close the sub picture.
Press to select either the right or left picture in order to change the TV
channel or video source using the white labeled buttons below. The
symbol “b” (or “B”) will appear to indicate which picture’s channel or input
mode can be changed.
Press repeatedly to scroll through the available video inputs for the picture
on which the symbol “b” (or “B”) is displayed. (see “TV/VIDEO” on page
26)
Press to select the TV channel on which the symbol “b”
(or “B”) is displayed. (for details, see “Watching the TV”
on page 21)
Speed Surf
1 Press and hold CH + or – to change the channel
number rapidly.
2 Release to display the desired channel.
Press to change between the VHF/UHF input and the AUX input for the
picture on which the symbol “b” (or “B”) is displayed.
The Picture-and-Picture (P&P) feature allows
you to view two channels simultaneously,
both in a reduced size screen. The main
picture will appear on the right.
Main picture
TV channel or input-
source mode for the
main picture*
TV channel or
input-source
mode for the
sub picture*
Sub
picture
Watching Two Programs at One Time — P&P (Twin View TM )
Using the Yellow Labeled Buttons for P&P Operations
TV/VIDEO
The symbol “≥”
indicates which picture's
sound is being received.
The symbol “b” or “B”
indicates which picture's TV
channel or input source can be
changed.
* It will dim in about 3 seconds.
CH
or or 0 9 -
JUMP
and ENTER
ANT
6 7
ACTIVE
31
Notes:
• The sound of the left (sub) picture is
monaural.
• Caption Vision is displayed for the right
(main) picture only.
• If one of the pictures received through
P&P is snowy, the entire screen may
become unstable. In this case, erase the
snowy channel. (see “Channel Skip/
Add” on page 39)
REFER TO THE
ILLUSTRATION OF THE
REMOTE CONTROL ON THE
INSIDE FRONT COVER OF
THIS MANUAL AS YOU
REVIEW THIS CHART
(under the cover)
Press to alternate sound between the right and left pictures. The symbol “ ” will
appear for a few seconds to indicate which picture’s sound is being received.
This is useful when you need to copy down information that appears on the TV’s
screen.
Press to freeze both the right and left pictures.
Press again to resume P&P viewing.
Press to switch the audio and video of the right and left pictures.
Each time you press SWAP, the picture and sound of the two will be exchanged.
Using the Yellow Labeled Buttons for P&P Operations
SWAP
AUDIO
INDEX
GUIDE
FREEZE