Sony KP-ES43 Manuel d'utilisation

Page 47

Advertising
background image

47

Additional Information

Possible cause

Symptom

Solutions

• The volume level is too

low.

• The sound is muted.

• The broadcast signal

has a transmission
problem.

• The “SPEAKER”

setting in the “AV
CONTROL” menu is
inappropriate.

• There is local

interference from cars,
neon signs, hair dryers,
power generators, etc.

• Broadcast signals are

reflected by nearby
mountains or buildings.

• The antenna direction

needs adjustment.

• Use of a booster is

inappropriate.

• The color level setting

is too low.

• The color system setting is

inappropriate.

• The antenna direction

needs adjustment.

• The magnetic

disturbance from
external speakers or
other equipment, or
the direction of the
earth’s magnetic field
may affect the
projection TV.

Additional Information

continued

Good picture

No sound

Dotted lines or

stripes

Double images or

“ghosts”

No color

Abnormal color

patches

• Press 2 + to increase the volume

level.

• Press % to cancel the muting.

• Press A/B until a better sound is

heard.

• When connecting to

C– (center

speaker input) on your projection TV to
use the projection TV speakers as center
speakers, set SPEAKER: CENTER IN, or
set SPEAKER: MAIN to listen to the
sound from a projection TV.

• Do not use a hair dryer or other

equipment near the projection TV.

• Adjust the antenna direction for

minimum interference. Contact a
Sony dealer for advice.

• Use a highly directional antenna.

• Use the fine tuning (“FINE”) function.

• Adjust the antenna direction. Contact

a Sony dealer for advice.

• Turn off or disconnect the booster if it

is in use.

• Display the “A/V CONTROL” menu and

select “ADJUST” of “PICTURE MODE”,
then adjust the “COLOR” level.

• Display the “CH PRESET” menu and

check the color system (“COL SYS”)
setting (usually set this to “AUTO”).

• Adjust the antenna direction. Contact

a Sony dealer for advice.

• Locate external speakers or other

equipment away from the projection
TV. Do not move the projection TV
while the projection TV is turned on.
Press ! on the projection TV to turn
off the TV for about five minutes,
then turn it on again.

Page

14

14

24

35

45

34

43

Advertising
Ce manuel est liée aux produits suivants: