Symphonic MGTD204 - Manuel (Page 22)

- 22 - EN
1C29
CHANGING V-CHIP BLOCKED PRO-
GRAMMING
Note: To change the rating, the TV must be turned to
a station that is not protected. If the (PROTECTED)
appears on the screen, please change the channel to a
station that is not protected.
1)Follow steps [1] to [2].
2)Press the Arrow button K or L to select “TV RAT-
ING”. Then press the ENTER button. Select a TV
rating to be unblocked by pressing the Arrow but-
ton K or L.
Then press the ENTER button to unblock the rating.
3)Press the SETUP button on the remote control to
exit the screen.
MPAA RATING SET UP
1
Select “V-CHIP SET UP”
Press the SETUP button on the
remote control.
Press the Arrow button K or L to
select “V-CHIP SET UP”. Then
press the ENTER button.
2
Enter Access code
Use the number buttons on the
remote control to enter the access
code.
3
Select “MPAA RATING”
Press the Arrow button K or L to
point to “MPAA RATING”.
Then press the ENTER button.
4
Select your desired item
Press the Arrow button K or L to
point to your desired item.
Then press the ENTER button to
select [BLOCK] or [VIEW].
• When you select the rating category and turn it
[BLOCK], the higher rating will turn [BLOCK]
automatically. Also, the lower rating will turn
[VIEW] automatically.
• When you turn “G” to [VIEW], all ratings will turn
to [VIEW] automatically.
Selection Rating Category Explanations
G General Audience
PG Parental Guidance suggested.
PG-13 Unsuitable for children under 13
R Restricted; under 17 requires accompa-
nying parent or adult guardian
NC-17 No one under 17 admitted
X Mature audience only
– V-CHIP SET UP –
TV RATING
B MPAA RATING
CHANGE CODE
G [VIEW]
PG [VIEW]
PG–13 [VIEW]
B R [BLOCK]
NC–17 [BLOCK]
X [BLOCK]
ACCESS CODE
_ _ _ _
5
Exit the V-Chip setting mode
Press the SETUP button on the remote control to
exit the screen.
CHANGE ACCESS CODE
To change access code, follow the steps below.
1
Select “V-CHIP SET UP”
Press the SETUP button on the remote control.
Press the Arrow button K or L to select “V-CHIP
SET UP”.
Then press the ENTER button.
2
Enter Access code
Use the number buttons on the remote
control to enter the access code.
The default code is 0000.
3
Select “CHANGE CODE”
Press the Arrow button K or L to
select “CHANGE CODE”. Then
press the ENTER button.
4
Enter New code
Use the number buttons to enter
your desired access code in the
NEW CODE space. Then enter the
same code in the CONFIRM
CODE space. V-CHIP SET UP
screen appear on the screen.
• If you enter wrong code, repeat step [4], making
sure you enter the same new code exactly in the
confirm code space.
5
Exit the V-Chip setting mode
Press the SETUP button on the remote control to
exit the screen.
Note: If you unplug the power cord or a power fail-
ure occurs, the changed access code will be lost and
will return to default (0000). Change your access
code again as necessary.
ACCESS CODE
_ _ _ _
NEW CODE
X X X X
CONFIRM CODE
_ _ _ _
– V-CHIP SET UP –
TV RATING
MPAA RATING
B CHANGE CODE
- TV/VCR SETUP -
TIMER PROGRAMMING
SETTING CLOCK
CHANNEL SET UP
USER’S SET UP
B V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
INDEX SEARCH