Sony CDX-F5510 - Manuel (Page 9)

9
CDX-F5510/F50M
2-515-314-11 (1)
H:\Data Disk\2515314111\251531411CDXF5510CDXF50MU\01US02CD-U.fm masterpage:Right H:\Data Disk\2515314111\251531411CDXF5510CDXF50MU\01US02CD-U.fm masterpage:Right
Receiving a station through a
list — list-up
You can list up the frequency or the name. For
details on labeling a station, see page 10.
1 Select the band, then press (LIST) .
The frequency or station name appears.
2 Press (LIST) repeatedly until the
desired station appears.
After 5 seconds, the unit returns to normal
reception mode.
3 Press (SEEK) –/+ to receive the
station.
With the card remote commander
In step 2, to select the station, press
M or m .
Other functions
Changing the sound
settings
Adjusting the sound characteristics
— BAL/FAD/SUB/AUX
You can adjust the balance, fader, and subwoofer
volume.
1 Press the select button repeatedly
until “BAL,” “FAD” or “SUB” appears.
The item changes as follows:
LOW * 1 t MID * 1 t HI * 1 t
BAL (left-right) t FAD (front-rear) t
SUB (subwoofer volume)* 2 t AUX (AUX
volume)* 3
*1 When EQ3 is activated (page 9).
*2 When the audio output is set to “SUB”
(page 10).
“ATT” is displayed at the lowest setting, and can
be adjusted up to 20 steps.
*3 When “AUX” source is selected (CDX-F50M only).
2 Rotate the volume control dial
repeatedly to adjust the selected item.
After 3 seconds, the setting is complete and
the display returns to normal play/reception
mode.
Note
Adjust within 3 seconds of selecting the item.
With the card remote commander
In step 2, to adjust the selected item, press
< , M , ,
or m .
Adjusting the equalizer curve
— EQ3
You can adjust and store the equalizer settings
for different tone ranges.
1 Select a source, then press (EQ3)
repeatedly to select the EQ3 type.
2 Press the select button repeatedly
until “LOW,” “MID” or “HI” appears.
3 Rotate the volume control dial
repeatedly to adjust the selected item.
The volume level is adjustable in 1 dB steps,
from –10 dB to +10 dB.
continue to next page t