Error displays/messages – Sony CDX-F5510 Manuel d'utilisation

Page 18

Advertising
background image

18

CDX-F5510/F50M

2-515-314-11 (1)

H:\Data Disk\2515314111\251531411CDXF5510CDXF50MU\01US02CD-U.fm

masterpage:Left

Error displays/Messages

MP3 files take longer to play back than
others.

The following discs take a longer time to start
playback.
– a disc recorded with a complicated tree

structure.

– a disc recorded in Multi Session.
– a disc to which data can be added.

The ATRAC CD cannot play.

• The disc is not created by authorized software,

such as SonicStage or SonicStage Simple
Burner.

• Tracks that are not included in the group cannot

be played.

The display items do not scroll.

• For discs with very many characters, those may

not scroll.

• “A.SCRL” is set to off.

t Set “A.SCRL-ON” (page 11) or press

(SCRL) on the card remote commander.

The sound skips.

• Installation is not correct.

t Install the unit at an angle of less than

45° in a sturdy part of the car.

• Defective or dirty disc.

The operation buttons do not function.
The disc will not eject.

Press the RESET button (page 4).

“MS” or “MD” dose not appear on the
source display when both the optional MGS-
X1 and MD changer are connected.

This unit recognizes MGS-X1 as an MD unit.
t Press (SOURCE) until “MS” or “MD”

appears, then press (MODE) repeatedly.

Radio reception

The stations cannot be received.
The sound is hampered by noises.

• Connect a power antenna control lead (blue) or

accessory power supply lead (red) to the power
supply lead of a car’s antenna booster (only
when your car has built-in FM/AM antenna in
the rear/side glass).

• Check the connection of the car antenna.
• The auto antenna will not go up.

t Check the connection of the power antenna

control lead.

• Check the frequency.
• When the DSO mode is on, the sound is

sometimes hampered by noises.
t Set the DSO mode to “OFF” (page 7).

Preset tuning is not possible.

• Store the correct frequency in the memory.
• The broadcast signal is too weak.

Automatic tuning is not possible.

• Setting of the local seek mode is not correct.

t Tuning stops too frequently:

Press (SENS) until “LOCAL-ON” appears.

t Tuning does not stop at a station:

Press (SENS) repeatedly until “MONO-
ON” or “MONO-OFF” (FM), or “LOCAL-
OFF” (AM) appears.

• The broadcast signal is too weak.

t Perform manual tuning.

During FM reception, the “ST” indication
flashes.

• Tune in the frequency accurately.
• The broadcast signal is too weak.

t Press (SENS) to set the monaural reception

mode to “MONO-ON.”

An FM program broadcast in stereo is heard
in monaural.

The unit is in monaural reception mode.
t Press (SENS) until “MONO-OFF” appears.

BLANK

*

1

Tracks have not been recorded on the MD.

*

2

t Play an MD with recorded tracks.

ERROR

*

1

• The disc is dirty or inserted upside down.

*

2

t Clean or insert the disc correctly.

• The disc cannot play because of some problem.

t Insert another disc.

FAILURE

(Illuminates until any button is pressed.)

The connection of speakers/amplifiers is
incorrect.
t See the installation guide manual of this

model to check the connection.

FAILURE

(Illuminates for about 1 second.)

When the XM tuner is connected, storing an
XM radio channel into a preset failed.
t Be sure to receive the channel that you

want to store, then try it again.

LOAD

The changer is loading the disc.
t Wait until loading is complete.

L.SEEK +/–

The local seek mode is on during automatic
tuning.

NO DATA

All custom names have been deleted, or none are
not stored.

NO DISC

The disc is not inserted in the CD/MD changer.
t Insert discs in the changer.

NO ID3

ID3 tag information is not written in the MP3
file.

Advertising
Ce manuel est liée aux produits suivants: