Sony MSAC-PC3 - Manuel (Page 20)

MSAC-PC3 3-078-326-12(1).US/FR
20-US
When the Removable Disk is not indicated
(Continued)
– When using Windows 98/Windows 98SE/Windows Me –
1
Display the “System Properties” screen.
Double-click the “System” icon in the “Control Panel.”
2
Check if the Device driver has already been installed.
1 Click the [Device Manager] tab on the “System Properties” screen.
2 Check whether [! SONY-Memory Stick] preceded by the “!” symbol
is shown.
P Note
[! Sony-Memory Stick] may be displayed as the following depending on the
type of OS and the “Memory Stick” you are using.
[!Sony Memory Stick]
[!Standard IDE/ESDI Hard Disk Controller]
[!PCMCIA IDE/ATAPI Controller]
3
Delete the driver if installed.
If you use the procedure described in Step 2 and find that [! Sony-
Memory Stick] is shown, a separate device driver has already been
installed.
Use the following procedure to delete this driver.
Do not delete other devices than [! Sony-Memory Stick].
1 Click on [! Sony-Memory Stick].
2 Click on [Remove]. The “Confirm Device Removal” screen appears.
3 Click the [OK] button. The device is removed.
4 Close the “System Properties” screen.
5 Restart your computer after disconnecting this unit from the
computer.
Install the Device driver again by performing the procedure from
“Connecting this unit to your computer” described on page 9.
P Note
• If you delete other devices than [! Sony-Memory Stick] your computer
may no longer operate normally.
• The computer recognize the “Memory Stick”with different capacity as the
different device.