Sony MSAC-PC3 - Manuel (Page 19)

How to Use (When using Windows)
MSAC-PC3 3-078-326-12(1).US/FR
19-US
3
Delete the driver if installed.
If you use the procedure described in Step 2 and confirm that [! SONY-
Memory Stick] is shown under in the “Devices by type” display, a
separate device driver has already been installed.
Use the following procedure to delete this driver.
Do not delete other devices than [! SONY-Memory Stick].
1 Right-click on [! SONY-Memory Stick].
2 Click on [Remove]. The “Confirm Device Removal” screen
appears.
3 Click the [OK] button. The device is removed.
4 Restart your computer after disconnecting this unit from the
computer.
Install the Device driver again by performing the procedure from
“Connecting this unit to your computer” described on page 9.
P Note
• If you delete other devices than [! SONY-Memory Stick] your computer
may no longer operate normally.
• The computer recognize the “Memory Stick” with different capacity as
the different divece.
• [! Sony-Memory Stick] may be displayed as the following depending on
the type of OS and the “Memory Stick” you are using.
[!Sony Memory Stick]
[!Standard IDE/ESDI Hard Disk Controller]
[!PCMCIA IDE/ATAPI Controller]