Setup, Step 1: connect your monitor to your computer, Step 2: connect the power cord – Sony CPD-110GS Manuel d'utilisation
Page 6: Step 3: turn on the monitor and computer, Step 1, Step 2, Step 3
Before using your monitor, check that the following accessories
are included in your carton:
• Power cord (1)
• Windows Monitor Information Disk (1)
• Warranty card (1)
• Notes on cleaning the screen’s surface (1)
• This instruction manual (1)
Step 1: Connect your monitor to
Turn off the monitor and computer before connecting.
Connecting to an IBM PC/AT or compatible
Connecting to a Macintosh or compatible
Step 2: Connect the power cord
With the monitor and computer switched off, first connect the
power cord to the monitor, then connect it to a power outlet.
Step 3: Turn on the monitor and
First turn on the monitor, then turn on the computer.
The installation of your monitor is complete.
If necessary, use the monitor’s controls to adjust the picture.
to video output
IBM PC/AT or
You will need a Macintosh adapter (not supplied).
to AC IN
to a power outlet
power cord (supplied)