Sony BDP-CX960 - Manuel (Page 77)

77 US
Add
iti
on
al
I
n
fo
rm
at
io
n
The HD Audio (Dolby Digital Plus, Dolby
TrueHD, DTS-HD High Resolution Audio,
and DTS-HD Master Audio) is not output
by bitstream.
, Set “BD Audio Setting” to “Direct” in the
“Audio Settings” setup (page 66).
, Check that the connected AV amplifier
(receiver) is compatible with each HD
Audio format.
The interactive audio is not output.
, Set “BD Audio Setting” to “Mix” in the
“Audio Settings” setup (page 66).
There is no picture or no sound when
connected to the HDMI OUT jack.
, Try the following: 1 Turn the player off
and on again. 2 Turn the connected
equipment off and on again. 3 Disconnect
and then reconnect an HDMI cable.
There is no picture or picture noise
appears when connected to the HDMI OUT
jack.
, The HDMI OUT jack is connected to a DVI
device that does not support copyright
protection technology.
, If the HDMI OUT jack is used for video
output, changing the video output
resolution may solve the problem
(page 64).
No sound is output from the HDMI OUT
jack.
, The HDMI OUT jack is connected to a DVI
device (DVI jacks do not accept audio
signals).
The sound is not output correctly when
connected to the HDMI OUT jack.
, The device connected to the HDMI OUT
jack does not support the audio format of
the player. Check the audio settings
(page 66).
The display language on the screen
switches automatically when connected to
the HDMI OUT jack.
, When “Control for HDMI” is set to “On”
(page 71), the display language on the
screen automatically switches according to
the language setting of the connected TV (if
you change the setting on your TV, etc.).
The “Control for HDMI” function does not
work (BRAVIA Sync).
, Check that the AC power cord of the
connected component is securely
connected.
, If the HDMI indicator does not appear in
the front panel display, check the HDMI
connection (page 19, 24).
, Set “Control for HDMI” to “On” (page 71).
, Make sure that the connected component is
compatible with the “Control for HDMI”
function. For details, refer to the operating
instructions supplied with the component.
, Check the connected component’s setting
for the “Control for HDMI” function. For
details, refer to the operating instructions
supplied with the component.
, If you change the HDMI connection, turn
the player off and on again.
, If power failure occurs, set “Control for
HDMI” to “Off,” then set “Control for
HDMI” to “On” (page 71).
, For details on the “Control for HDMI”
function, see “About the BRAVIA Sync
Features (HDMI connections only)”
(page 54).
, If you connect the player to a TV through an
AV amplifier (receiver) that is not
compatible with the “Control for HDMI”
function, you may be unable to control the
TV from the player.
The external memory is not recognized.
, Try the following: 1 Turn the player off.
2 Insert the external memory. (In the case
of the USM1GH/USM2GH, insert with the
V mark facing up towards the V mark at the
top left of the EXT slot.)
3 Turn the player
on. 4 Check that the EXT indicator lights
up in the front panel display.
HDMI
External memory (local
storage)
,continued