Sharp MD-MT99C - Manuel (Page 15)

ENGLISH
01/4/26 99secl_E_3.fm
E-14
B
asic Operat
ion
-P
la
yb
a
c
k-
To interrupt playback
Press the PLAY/PAUSE button.
To resume playback, press the PLAY/PAUSE button
again.
To stop playback
Press the /:OFF button.
If the unit is not operated for at least 2 minutes whilst in
the stop mode, the power will shut off automatically.
To turn off the power
Press the /:OFF button whilst in the stop mode.
„ Volume control
Press the VOL+ button to increase the volume and the
VOL- button to decrease the volume.
„ Bass control
Each time the BASS button is pressed, the tone will be
switched as follows.
Notes:
z If power failure occurs whilst playing a disc using the
AC adaptor, disconnect it from the wall socket. Other-
wise, playback may start automatically when electricity
resumes.
z If you connect the AC adaptor without installing the
rechargeable battery, playback may start automati-
cally. Be sure to turn off the power.
z Reduce the volume before starting to play. MiniDiscs,
compared to ordinary cassette tapes, have very little
noise. If the volume is adjusted according to your
usual expectations of noise, high volume may damage
your hearing.
z The sound escaping from your headphones may
annoy people around you. In particularly crowded
places (such as on trains or buses), reduce the vol-
ume.
1
Insert the headphones plug firmly into the head-
phones socket on the remote control.
2
Plug the remote control into the REMOTE sock-
et on the unit.
3
Insert a MiniDisc (page 6).
4
Press the PLAY/PAUSE button.
Playback starts automatically with a playback only
MiniDisc or a MiniDisc which is protected against
accidental erasure (Auto-play function).
Volume (0-30)
BASS 1 Emphasised slightly
BASS 2 Emphasised more
BASS 3 Emphasised fully
BASS OFF Cancelled
MD-MT99C