JVC XV-S200 - Manuel (Page 42)

Initial settings
40
Ini
ti
a
l set
tings
SUBTITLE
You can select the default subtitle language to be
displayed if it is contained on the disc.
Each time you press
CURSOR
3, the language
setting changes in the
following order:
ENGLISH
→ → → → SPANISH → → → → FRENCH → → → → CHINESE → → → →
GERMAN → → → → ITALIAN → → → → JAPANESE → → → → language code
from AA to ZU
(See “Appendix A: Table of languages and their
abbreviations” at the end of this manual.)
Pressing CURSOR 2 changes the language setting in the
reverse order of the above.
* If the selected language is not recorded, the disc’s
default subtitle language will be displayed.
ON SCREEN LANGUAGE
You can select the on-screen display language to be
displayed.
Each time you press
CURSOR
3, the language
setting changes as follows:
Pressing CURSOR 2 changes the language setting in the
reverse order of the above.
DIGITAL AUDIO OUTPUT
To connect the unit’s digital
output to an external device
equipped with a digital input,
this item must be set
correctly.
• PCM ONLY
When you connect the DIGITAL OUT jack of the unit to
the linear PCM digital input of other audio equipment.
• STREAM/PCM
When you connect to the digital input of an amplifier
to a built-in DTS, Dolby Digital, or MPEG multichannel
decoder.
• DOLBY DIGITAL/PCM
When you connect to the digital input of a Dolby
Digital decoder, or an amplifier with a built-in Dolby
Digital decoder.
The following chart shows the relationship between
types of playback discs and output signals.
MENU LANGUAGE ENGLISH
ENGLISH
ENGLISH
ENGLISH
EXIT
AUDIO LANGUAGE
SUBTITLE
ON SCREEN LANGUAGE
AUDIO DISPLAY SYSTEM LANGUAGE
PRESS KEY
MENU LANGUAGE ENGLISH
ENGLISH
ENGLISH
ENGLISH
EXIT
AUDIO LANGUAGE
SUBTITLE
ON SCREEN LANGUAGE
AUDIO DISPLAY SYSTEM LANGUAGE
PRESS KEY
ON SCREEN LANGUAGE ENGLISH
IDIOMA EN PANTALLA
FRANCAIS
Spanish
English
French
AUDIO page
Playback discs
Output
STREAM/
PCM
DOLBY
DIGITAL/
PCM
PCM ONLY
DVD with 48 kHz,
16 bit linear PCM 48 kHz,16 bit
linear PCM
+ +
DVD with 48 kHz,
20/24 bit linear
PCM 48 kHz,
20/24 bit
linear PCM
+ +
DVD with 96 kHz,
linear PCM No output
+ +
DVD with DTS DTS bitstream No ouput +
DVD with Dolby
Digital Dolby Digital
bitstream
+
48 kHz, 16 bit
linear PCM
DVD with MPEG
multichannel MPEG
bitstream 48 kHz, 16 bit
linear PCM
+
Video CD/SVCD 44.1 kHz,
16 bit
linear PCM
+ +
Audio CD 48 kHz,16 bit
linear PCM
+ +
Audio CD with DTS DTS bitstream + +
MP3 CD No output + +
NOTES
• The unit does not provide the DTS decoding function.
• When playing a DVD VIDEO or Audio CD disc with DTS,
use a DTS decoder to get correct signals from your
speakers. Never use the unit's analog output jacks,
which output incorrect signals that may damage your
speakers.
• If you connect the analog outputs and digital outputs
simultaneously, be sure to select the source of the
amplifier correctly, or set the level control of the
amplifier connected to the analog outputs to minimum.
DIGITAL AUDIO OUTPUT STREAM / PCM
Lo / Ro
ON
EXIT
DOWN MIX
COMPRESSION
AUDIO DISPLAY SYSTEM LANGUAGE
PRESS KEY
;96%. & B(QJERRN 3DJH  7KXUVGD\ 'HFHPEHU     $0