Connections – JVC TH-C43C Manuel d'utilisation

Page 16

Advertising
background image

13

You can enjoy the sound of an analog component.

NOTE

• The signals input to the VIDEO jack of the VCR IN jacks will be

output only from the VIDEO jack of the VIDEO OUT jacks, not from
the S-VIDEO jack of the VIDEO OUT jacks.

You can enjoy the sound of a digital component.

*

DBS = Direct Broadcasting Satellite

NOTE

• Only digital audio signals can be input when selecting “DBS” as the

source to play. (See page 17.) When connecting a video component
such as a DBS tuner, operate this system to listen to the sound.

You can connect a USB mass storage class device such as a USB
flash memory device, hard disc drive, multimedia card reader,
digital camera, etc. to this system.
• After connecting a USB mass storage class device to this system

and selecting “USB MEMORY” as the source, the control screen
appears on the TV screen. (See page 28.)

NOTE

• When connecting a USB mass storage class device, refer also to its

manual.

• Connect one USB mass storage class device to the system at a time. Do

not use a USB hub.

• You cannot charge the USB mass storage class device while

connecting it to the USB MEMORY jack.

• While playing back a file in a USB mass storage class device, do not

disconnect the device. It may cause a malfunction of both the system
and the device.

• JVC bears no responsibility for any loss of data in the USB mass

storage class device while using this system.

• When connecting with a USB cable, use a cable less than 1 m in

length.

• This system is compatible with the USB 2.0 Full-Speed (not

compatible with the USB 1.1).

• You can play back the following types of files in a USB mass storage

class device (maximum data transfer rate: 2 Mbps):
– Music: MP3, WMA
– Picture: JPEG
– Movie: MPEG-4 (ASF), DivX (maximum frame rate of 30 fps for

progressive)

• You cannot play back a file larger than 2 GB.
• When playing a file which has a large transfer rate, frames or sounds

may be dropped during playback.

• This system cannot recognize a USB mass storage class device whose

rating exceeds 5 V/500 mA.

• This system may not recognize some USB mass storage class devices.
• This system may not playback some files even though their formats

are listed above.

.

Make sure that all other connections have been completed.

CAUTION

• Disconnect the power cord before cleaning or moving the system.
• Do not pull on the power cord to unplug the cord. When unplugging

the cord, always grasp and pull the plug so as not to damage the cord.

Connecting to an analog
component

Connecting to a digital
component

RCA pin plug
cord
(not supplied)

1

To composite video output

2

To S-video output

3

To audio output

1

2

3

Center unit

VCR (1

3 or 2

3)

TV (3)

Cassette recorder (3)

Composite video

cord

(not supplied)

S-video cord

(not supplied)

or

Digital optical cord (not supplied)

To digital optical output

DBS* tuner

MD player

Center unit

Connecting a USB mass storage
class device

Connecting the power cord

Center unit (on the
front panel

USB cable (not supplied)

Center unit

Powered
subwoofer

Power cord

(Supplied)

Power cord

Plug into AC outlets.

Connections

Do not connect the power cord until all other connections have been made.

EN_TH-C43[C]3.book Page 13 Tuesday, March 14, 2006 4:44 PM

Advertising