English – JVC KD-DV6201 Manuel d'utilisation

Page 42

Advertising
background image

ENGLISH

42

Symptom

Remedy/Cause

USB memory playback

• Noise is generated.

The track played back is not an MP3/WMA track. Skip to
another file. (Do not add the extension code <.mp3> or
<.wma> to non-MP3 or WMA tracks.)

• “CHECK” keeps flashing on the display.

• Readout time varies depending on the USB memory.
• Do not use too many hierarchies and folders.
• Turn off the power then on again.

• “NO FILE” flashes on the display.

Attach a USB memory that contains tracks encoded in an
appropriate format.

• “NOT SUPP” appears on the display and track

skips.

The track is unplayable.

• “READ” and “FAILED” appear alternately

on the display, then returns to the previous
source.

• The attached USB memory may be malfunctioning, or

may not have been formatted correctly. The files included
in the USB memory are corrupted.

• Do not pull out or attach the USB memory while “CHECK”

is shown.

• Correct characters are not displayed (e.g.

album name).

This unit can only display letters (upper case), numbers, and
a limited number of symbols.

• While playing a track, sound is sometimes

interrupted.

MP3/WMA tracks have not been properly copied into the
USB memory. Copy MP3/WMA tracks again into the USB
memory, and try again.

CD changer

• “NO DISC” appears on the display.

Insert a disc into the magazine.

• “NO MAG” appears on the display.

Insert the magazine.

• “RESET 8” appears on the display.

Connect this unit and the CD changer correctly and press
the reset button of the CD changer.

• “RESET 1” – “RESET 7” appears on the display. Press the reset button of the CD changer.

• The CD changer does not work at all.

Reset the unit (see page 2).

DAB

• “NO DAB” appears on the display.

Move to an area with stronger signals.

• “RESET 08” appears on the display.

Connect this unit and the DAB tuner correctly and reset the
unit (see page 2).

• The DAB tuner does not work at all.

Reconnect this unit and the DAB tuner correctly. Then, reset
the unit (see page 2).

• “ANT NG” appears on the display.

Check the cords and connections.

EN34-45_DV6202_001A_f.indd 42

EN34-45_DV6202_001A_f.indd 42

12/29/05 12:39:53 PM

12/29/05 12:39:53 PM

Advertising