General settings — psm, English, Adjusting the sound – JVC KD-DV6201 Manuel d'utilisation
Page 28
28
ENGLISH
Adjusting the sound
1
2
Adjust the level.
FAD*
1
(fader)
Adjust the front and rear speaker
balance.
R06 to F06
BAL
(balance)
Adjust the left and right speaker
balance.
L06 to R06
LOUD
(loudness)
Boost low and high frequencies to
produce a well-balanced sound at low
volume level.
LOUD ON or
LOUD OFF
SUB.W*
2
(subwoofer)
Adjust subwoofer output level.
00 to 08
VOL.A*
3
(volume adjust)
Adjust and store auto-adjustment
volume level for each source,
comparing to the FM volume level.
–05 to +05
VOL
(volume)
Adjust the volume.
00 to 30
(or 50)
*
4
*
1
If you are using a two-speaker system, set the
fader level to “00.”
*
2
This takes effect only when a subwoofer is
connected.
*
3
You cannot make an adjustment for FM.
“FIX” appears.
*
4
Depending on the amplifier gain control
setting. (See page 30 for details.)
General settings — PSM
You can change PSM (Preferred Setting Mode)
items listed in the table that follows.
1
Enter the PSM settings.
2
Select a PSM item.
3
Select or adjust the selected PSM item.
4
Repeat steps 2 and 3 to adjust other
PSM items if necessary.
5
Finish the procedure.
EN28-33_DV6202_001A_3.indd 28
EN28-33_DV6202_001A_3.indd 28
12/19/05 2:47:20 PM
12/19/05 2:47:20 PM