Troubleshooting – JVC AV 27D305 Manuel d'utilisation

Page 44

Advertising
background image

Troubleshooting

44

There is no power

There is no picture
or sound

You cannot select a
certain channel

The power turns off
by itself

The clock is wrong

The color quality
is poor

The On Timer is
blinking

There are lines
across the picture

The picture is spotted

There are double
pictures (ghosts)

Picture is snowy
(image noise)

Screen is 80% black

Stereo or bilingual
programs can't be
heard

Static electricity

You hear occasional
crackling sounds

Remote control is not
operating properly or
at all

• See if the power cord became unplugged.
• Check for a blown fuse or circuit breaker or a power outage.

• The antenna could be disconnected.
• The input mode could be set improperly. See page 42.
• The tuner (Auto Tuner Setup) could be set improperly. See page 24.
• The TV station may be having difficulties. Check to see if other stations are working.

• Check to see that the batteries are still working and properly installed.
• Make sure the remote has a clear sight path to the TV.
• Check that the TV/CATV switch is in the proper position.
• You may be too far from the TV. You must be within 23 feet (7 meters).

• Make sure the channels have been programmed. See "Channel Summary", page 24.
• Check to see if the channel is locked. See "Channel Summary - Lock" page 25.

• Make sure the set did not become unplugged.
• Perhaps the On/Off Timer is set. See page 38.
• Check to see if the Sleep Timer was set. See page 40.

• The power was interrupted and the clock was not reset. See page 37.

• There is a problem with the TV. Unplug the set and call for service.

• Tint and Color may be improperly adjusted. See page 34.
• The Video Status mode may be turned to the wrong setting. See page 41.

• There could be interference from another electrical appliance, such as a computer,
another TV or VCR. Move any such appliances further away from the TV.

• There could be interference from a high-wattage appliance, like a hairdryer or vacuum,
operating nearby. Move the antenna away from the appliance or change to a coaxial
cable connection which is less prone to interference.

• A building or passing airplane can reflect the original signal and produce a second,
slightly delayed one. Adjust your antenna position.

• Your antenna may be damaged, disconnected or turned. Check the antenna
connection. If the antenna is damaged, replace it.

• The Closed Caption Text mode is on. Turn it off in the Closed Caption Menu, page 39.

• Make sure the MTS settings are correct. See "MTS" on page 36.

• It is normal to feel static electricity if you brush or touch the screen.

• It is normal for the TV to make crackling sounds when first turned on or off. Unless
the sound or picture become abnormal, this is fine.

PROBLEMS

CHECK

AV-27\32D305 "B" English 44

2/4/05, 9:15:17 AM

Advertising