Jenn-Air Dishwasher W10300216A - Manuel (Page 3)

3
Quick Steps
Dishwasher Use
Prepare and Load the Dishwasher
IMPORTANT: Remove leftover food, bones, toothpicks and other
hard items from the dishes. Remove labels from containers before
washing.
10 Place load pattern
12 Place load pattern
■ Make sure that when the dishwasher door is closed no items
are blocking the detergent dispenser.
■ Items should be loaded with soiled surfaces facing down and
inward to the spray as shown. This will improve cleaning and
drying results.
■ Avoid overlapping items like bowls or plates that may trap food.
■ Place plastics, small plates and glasses in the upper rack.
Wash only plastic items marked “dishwasher safe.”
■ To avoid thumping/clattering noises during operation: Load
dishes so they do not touch one another. Make sure lightweight
load items are secured in the racks.
Add Detergent
NOTE: If you do not plan to run a wash cycle soon, run a rinse
cycle. Do not use detergent.
■ Use automatic dishwasher detergent only. Add powder, liquid
or tablet detergent just before starting a cycle.
1 Prepare and load
dishwasher. 3 Select a cycle and option.
(Cycles and options vary by model.)
2 Add detergent
for cleaning and
rinse aid for
drying. 4 Start dishwasher.
NOTE: If the Start/Resume button is
located on the top of the door, push
the door firmly closed within
3 seconds of pressing START/
RESUME.
STEP 1
Upper rack Lower rack
Upper rack Lower rack
■ Make sure nothing keeps spray arm(s) from
spinning freely. It is important for the water
spray to reach all soiled surfaces.
■ When loading silverware, always place sharp
items pointing down. Mix some of the items
having pointing up and some pointing down.
STEP 2