Jenn-Air JJW3430 - Manuel (Page 31)

31
Delay Start
Delay Start allows the oven(s) to be set to turn on at a certain
time of day.
Delay Start should not be used for food such as breads and
cakes because they may not bake properly.
Delay Start is available with any cycle that has a Delay Start
button.
To Set a Delay Start:
1. From any mode with the Delay Start button available, press
DELAY START. (Delay Start is available on the Timer Not Set/
Cook Time screen or the temperature screen).
2. Set time of day you would like the oven to start heating by
using the slider to enter a desired time or press the “-15min”
or “+15min” buttons. These buttons decrease or increase the
selected time and also move the slider.
3. Touch SET DELAY.
4. To change the previously set delay start time, touch START
TIME, make necessary changes and touch DELAY.
Delay with Cook Timer:
1. If Delay with Cook Timer is desired, select Timer Not Set or
Cook Timer.
2. Program desired cook time.
3. (Optional) Touch Delay Start. The difference between the start
and end time should equal the cook time.
4. Optional) Select Keep Warm: ON to set Keep Warm to come
on after the cook time expires.
5. Use the slider to enter a desired begin and end time or press
the “-15min” or “+15min” buttons. These buttons decrease or
increase the selected begin/end time and also move the
slider.
6. Touch SET DELAY.
Delay with Probe:
1. If Delay is chosen when the probe is in use, select Delay Start
when at the Probe Temp screen, then select when cooking
should begin. Because the probe controls the end time, the
end time will not be displayed.
2. Use the slider to enter a desired begin time or press the
“-15min” or “+15min” buttons. These buttons decrease or
increase the selected begin and also move the slider.
3. The oven will automatically keep the food warm when the
probe reaches the target temperature.
4. Touch SET DELAY.
Delay for Clean
1. If Delay for Clean is desired, select Delay Start after selecting
the Cleaning level. Select when cleaning should begin. The
oven will calculate the end time based on your cleaning level
choice.
2. Use the slider to enter a desired begin and end time or press
the “-15min” or “+15min” buttons. These buttons decrease or
increase the selected begin/end time and also move the
slider.
3. The oven will cool for an additional hour after cleaning is
completed.
4. Touch SET DELAY.
WARNING
Food Poisoning Hazard
Do not let food sit in oven more than one hour before
or after cooking.
Doing so can result in food poisoning or sickness.
WARNING
Burn Hazard
Use an oven mitt to remove temperature probe.
Do not touch broil element.
Failure to follow these instructions can result in burns.