Starting your washer, Press power to turn on washer, Select cycle modifiers – Maytag BRAVOS W10420493A-SP Manuel d'utilisation

Page 9: Select cycle, Select start/pause to begin wash cycle, Select cycle options

Advertising
background image

9

6.

Press POWER to turn on washer

8.

Select cycle modifiers

Once you select a cycle, the default settings for that cycle

will be lit. Press the cycle modifiers buttons to change

the Wash Temp/Rinse Temp, Soil Level, and Spin Speed,

if desired.
NOTE: Always read and follow fabric care labels instructions

to avoid damage to your garments.

7.

Select cycle

Turn cycle knob to choose your wash

cycle. The indicator for Estimated Time Remaining will light up

with a cycle time. For more information, see “Control Panel”.

10.

Select Start/Pause to begin

wash cycle

Press the START/Pause button to start the wash cycle.

When the cycle has finished, the DONE indicator will light

and the end of cycle signal will sound (if set). Promptly remove

garments after cycle has completed to avoid odor, reduce

wrinkling, and rusting of metal hooks, zippers, and snaps.

Unlocking the lid to add garments

If you need to open the lid to add 1 or 2 missed garments:

Press START/Pause; the lid will unlock once the washer

movement has stopped. This may take several minutes

if the load was spinning at high speed. Then close lid

and press START/Pause again to restart the cycle.
If lid is left open for more than 10 minutes, the water

will pump out.

9.

Select cycle options

Select any other cycle options you may wish to add, if not

previously set. Some cycles will automatically add certain

options such as Fabric Softener or Extra Rinse. These can

be turned off, if desired.
NOTE: Not all options are available with all cycles.

Wash Temp

Hot

Some cold water is added to save

energy. This may be cooler than

your hot water heater setting.

Warm

Some cold water will be added,

so this may be cooler than what

your previous washer provided.

Cool - brights/darks

Warm water is added to assist

in soil removal and to help

dissolve detergents.

Cold

Warm water may be added

to assist in soil removal

and to help dissolve detergents.

Make sure the dispenser drawer is closed completely, then

press POWER/CANCEL to turn on the washer.

Suggested Fabrics

Whites and pastels
Durable garments
Heavy soils

Bright colors
Moderate to light soils

Colors that bleed

or fade
Light soils

Dark colors that

bleed or fade
Light soils

Starting Your Washer

Advertising
Ce manuel est liée aux produits suivants: