Start, Setting a delayed start, Pause – Maytag FRONT-LOADING AUTOMATIC WASHER W10254495A Manuel d'utilisation

Page 13: Press and hold start/pause to begin wash cycle, Remove garments promptly after cycle is finished

Advertising
background image

13

12.

Setting a delayed start

If you do not want to begin a cycle immediately, you may

choose the DELAY START option. This will delay the start

of the wash cycle by up to 10 hours on models with Steam,

and 8 hours on non-Steam models.
To set a delayed Start:
1.
Press DELAY START s and t buttons to set the desired

delay time.

2. Press START/PAUSE to set the delay. The delay countdown

has started when the START/PAUSE light stops blinking.

+

-

temp level

soil level

start

pause

press and

hold to start

13.

Press and hold START/PAUSE

to begin wash cycle

Press and hold the START/PAUSE button to start the wash

cycle. To pause a cycle in progress, press the START/PAUSE

button once, then press and hold again to continue the cycle.

To cancel a cycle, press the POWER/CANCEL button.
Once you press and hold START/PAUSE, you will hear the

door lock, unlock, and lock again. The washer door will remain

locked during the wash cycle.

Unlocking the door to add garments:

If you need to open the door to add 1 or 2 missed garments,

you may do so while the “Add a Garment” light is lit.
Press START/PAUSE once; the door will unlock

once the washer movement has stopped.

This may take several minutes. Then close

door and press START/PAUSE again to restart

the cycle.

start

pause

press and

hold to start

14.

Remove garments promptly

after cycle is finished

Promptly remove garments after cycle has

completed to avoid odor and rusting of

metal objects on garments. When unloading

garments, pull back the door seal and check

for small items between the tub and the

washer drum.
If you will be unable to remove the load

promptly, use the Fresh Hold

®

option. If the

Fresh Hold

®

option is selected, the washer will

automatically activate the fan and tumble

the load periodically for up to 16 hours.
NOTE:

n

After any wash cycle is completed,

the door must be opened and then

closed before a new cycle can begin.

n

A small amount of water may remain in the dispensers after

the wash cycle is complete. This is normal.

n

This washer has a tight seal to avoid water leaks. To avoid

odors, leave the door open to allow the washer to dry

between uses.

fresh

hold

Advertising
Ce manuel est liée aux produits suivants: