Additional features, Modifiers – Maytag W10240444A Manuel d'utilisation

Page 9

Advertising
background image

9

Wrinkle Control

Use this cycle to wash loads of no-iron fabrics such as sport shirts,

blouses, casual business clothes, permanent press, and blends. This

cycle uses medium-speed wash action, a low-speed spin, and a

cool down process to help reduce wrinkling.

Darks/Colors

Use this cycle for lightly soiled, colored clothing or towels. This

cycle uses medium-speed wash action and medium-speed spin.

Rapid Wash

Use this cycle to wash small, lightly soiled loads that are needed

in a hurry. This short cycle combines high-speed wash action and

high-speed spin for the optimal cleaning and shortened dry times.

A Water Save Spray Rinse is a preset cycle setting for this cycle.

Hand Wash

This cycle combines low-speed wash and low-speed spin action

to clean items labeled as “Machine Washable” on the garment

care label. Pre Soak and Deep Clean options are not available

in this cycle.

Clean Washer with AffRESH

Use the Clean Washer with AFFRESH

cycle once a month to keep

the inside of your washer fresh and clean. This cycle uses a higher

water level. Use with AFFRESH

®

washer cleaner tablet or liquid

chlorine bleach to thoroughly clean the inside of your washing

machine. This cycle should not be interrupted. See “Cleaning Your

Washer.”

IMPORTANT: Do not place garments or other items in the washer

during the Clean Washer with AFFRESH

cycle. Use this cycle with

an empty wash tub.

Soak

This cycle is preset for a 31-minute cycle and soak time can be

adjusted according to your needs by selecting Soil Level. After the

selected soak period has ended, the washer will drain but does not

spin the load. At the end of Soak, the washer will drain and wait

for a wash cycle to be selected, to complete the cleaning process.

NOTE: Automatic bleach dispensing is not part of the soak cycle.

Rinse & Spin

Use this option to get a deep rinse followed by a high-speed spin.

The time display will include an estimate of how long it will take

to fill and drain the washer.

When to use RINSE & SPIN:

For loads that need rinsing only.

For completing a cycle after the power has been off. The

machine will return to pause mode if the power was interrupted

or unplugged while cycle was running.

Drain & Spin

Drain & Spin may help shorten drying times for some heavy fabrics

or special-care items. Drain & Spin may also be used for draining

the washer after canceling a cycle or completing a cycle after a

power failure.

Additional features

These lights show which portion of the cycle is operating. They also

indicate when you can add other garments to the wash load.

Indicator lights

An indicator light shows which Cycle, Modifiers, and Options you

have selected.

Estimated Time Remaining

When a wash cycle is started, the estimated time remaining for the

cycle, including fills and drains, will be displayed. The time will

count down to the end of the cycle.

Modifiers

Modifiers allow you to further customize your cycles and save energy.

Wash Temp/Rinse Temp

Select a water temperature based on the type of load you are

washing. Use the warmest wash water safe for fabrics. Follow

garment label instructions.

Warm rinses leave the loads drier and more comfortable to handle

than cold rinses. However, warm rinses also increase wrinkling.

Cold rinses may help with wrinkling and save energy.

Temperature Guide

Wash Water Temperature

Suggested fabrics

Hot

Whites and pastels

Warm

Bright colors

Cold

Colors that bleed or fade

NOTE: In wash water temperatures colder than 60°F (15.6°C),

detergents do not dissolve well. Soils may be difficult to remove.

Spin Speed

This washer automatically selects the spin speed based on the cycle

selected. The preset speeds can be changed. Spin speeds may vary by

cycle.

Soil Level

Soil Level (wash time) is preset for each wash cycle. See “Preset

Cycle Settings” in “Cycles.” As you press the Soil Level pad,

the cycle time will increase or decrease in the Estimated Time

Remaining display and a different wash time will appear. To get

the minimum wash time, press the pad until the indicator light

next to Light illuminates. This is the shortest wash time available

for that cycle with the wash options selected.

For most loads, use the time recommended in the preset cycle

settings.

For heavy soil and sturdy fabrics, press Soil Level to select

more wash time, if needed.

For light soil and delicate fabrics, press Soil Level to select less

wash time, if needed.

Advertising