Maytag BRAVOS W10373815A - SP - Manuel (Page 4)

4
CONTROL PANEL AND FEATURES
ESTIMATED TIME REMAINING DISPLAY
The Estimated Time Remaining display shows the time
required for the cycle to complete. Factors such as load size
and water pressure may affect the time shown in the display.
Tightly packed, unbalanced loads, or excessive suds may
cause the washer to adjust the cycle time, as well.
POWER/CANCEL BUTTON
Press to turn the washer ON or OFF.
WASH CYCLE KNOB
Use the Wash Cycle knob to select available cycles on your
washer. Turn the knob to select a cycle for your laundry load.
See “Cycle Guide” for detailed descriptions of cycles.
START/PAUSE BUTTON
Press to start the selected cycle. Be sure all desired
Modifiers and Options have been selected. Press START/
PAUSE once to unlock the lid and add a garment. Press to
complete the cycle from where it was stopped. The lid must
be closed for the washer to start.
OPTIONS AND MODIFIERS
Modifiers allow you to further customize your cycles and
save energy.
WASH TEMP/RINSE TEMP
Select a water temperature based on the type of load you
are washing. Use the warmest wash water suitable for
fabrics. Follow garment label instructions.
Warm rinses leave the loads drier and more comfortable
to handle than cold rinses. However, warm rinses also
increase wrinkling. Cold rinses may help with wrinkling
and save energy.
NOTE: In wash water temperatures colder than 60°F
(15.6°C), detergents do not dissolve well. Soils may be
difficult to remove.
SPIN SPEED
This washer automatically selects the spin speed
based on the cycle selected. The preset speeds can
be changed. Not all spin speeds are available with
all cycles.
• Faster spin speeds mean shorter dry times, but
may increase wrinkling in your load.
• Slower spin speeds mean less wrinkling, but will
leave your load more damp.
1
1
2
3
3
4
SOIL LEVEL
Soil Level (wash time) is preset for each wash cycle. As
you press Soil Level, the cycle time (minutes) will increase
or decrease in the Estimated Time Remaining display and
a different wash time will appear.
For most loads, use the Soil Level that is preset with the
cycle you have chosen. For heavily soiled and sturdy
fabrics, press SOIL LEVEL to select more wash time,
if needed. For lightly soiled and delicate fabrics, press
SOIL LEVEL to select less wash time, if needed. Lower
Soil Level setting will help reduce tangling and wrinkling.
CYCLE OPTIONS
When you select a cycle, its default options will light up. Not
all cycles, options, and modifiers are available on all models.
WATER SAVE SPRAY RINSE
Use this option to save water by using a spray rinse
instead of a deep water rinse. This option is the default
setting on some cycles, and selectable on other cycles.
When using fabric softener, always select the Fabric
Softener button, or select Extra Rinse; both of these
options will dispense fabric softener in a deep rinse.
OxI TREAT STAINS
This washer is designed to dispense laundry boosters
such as oxygenated stain treaters and color-safe
bleach at the correct time in the cycle for best cleaning
performance. Do not use laundry boosters and chlorine
bleach in the same cycle.
CLEAN BOOST WITH HEATER
The Clean Boost with Heater option helps to ensure better
soil and stain removal. Clean Boost uses a heater within
the washer to maintain the selected temperature setting
throughout the wash period. This option will add some
additional time to the cycle based on which temperature
is selected. It is a preset cycle setting on the Sanitary and
Power Wash cycles.
Clean Boost with Heater may be selected as an option
with other cycles. See chart for details.
4
5
Not all features and cycles are available on all models.
2
6
5
6 7
8