Select cycle modifiers, Press start/pause/unlock to begin wash cycle, Select cycle options – Maytag W10280467C Manuel d'utilisation

Page 9

Advertising
background image

9

Wash Temp

Hot

Some cold water is added to save

energy. This may be cooler than your

hot water heater setting.

Warm

Some cold water may be added, so

this will be cooler than what your

previous washer provided.

Cool - brights/darks

Warm water is added to assist

in soil removal and to help

dissolve detergents.

Cold

Warm water may be added to

assist in soil removal and to help

dissolve detergents.

Whites and pastels

Durable garments
Heavy soils

9.

Select cycle modifiers

Once you select a cycle, the default settings for that cycle will be

lit. Press the cycle modifiers buttons to change the Temperature

(Temp Level), Soil Level, and Spin Speed, if desired.
NOTE: Always read and follow fabric care labels instructions

to avoid damage to your garments.

11.

Press START/PAUSE/UNLOCK

to begin wash cycle

Press the START/PAUSE/UNLOCK button to start the wash

cycle. Filling is delayed for several minutes while load balance

is sensed. When the cycle has finished, the DONE indicator will

light up. Promptly remove garments after cycle has completed

to avoid odor, reduce wrinkling, and rusting of metal hooks,

zippers, and snaps.

Unlocking the lid to add garments

If you need to open the lid to add 1 or 2 missed garments:

Press START/PAUSE/UNLOCK; the lid will unlock once

the washer movement has stopped. This may take several

minutes if the load was spinning at high speed. Then close

lid and press START/PAUSE/UNLOCK again to restart

the cycle.
If lid is left open for more than 10 minutes the water will

pump out.

Delay in water fill

Filling is delayed for 2 to 3 minutes to check for load unbalance.

You will hear the hum of the spin prior to filling. This is normal

operation.

10.

Select cycle options

Select any other cycle options you may wish to add, if not

previously set. Some cycles will automatically add certain options

such as Extra Rinse. These can be turned off, if desired.
NOTE: Not all options are available with all cycles.

Bright colors

Moderate to light soils

Colors that bleed

or fade
Light soils

Dark colors that bleed

or fade

Light soils

Suggested Fabrics

Advertising
Ce manuel est liée aux produits suivants: