GE 26936 - Manuel (Page 8)

8
5. Remove the wall mount bracket.
Rotate it so that the bottom of
the phone is flat. Reattach the
wall mount bracket by inserting
the tabs into the slots on the top
of the unit first, and then
snapping the bottom tabs into
place.
6. Plug the telephone line cord into
the jack marked TEL LINE on the
back of the unit and plug the
other end into a modular wall
jack. Then stuff the excess line
cord into the wall mount
bracket.
7. Slip the mounting holes over
the wall plate posts and slide
the unit down firmly into place.
(Wall plate not included.)
8. Remove the handset hook; turn
it upside down, and put it back
in the slot. You need to do this
so the handset doesn’t fall out
of the base.
9. Raise the base antenna.
NOTE : The phone automatically
defaults to touch-tone dialing. To
change to pulse (rotary) dialing,
see “Tone/Pulse Dialing”. If you
don’t know which type of service
you have, check with the phone
company.
9
7
8
6
5
WXYZ 9 TUV 8 PQRS 7
MNO 6 JKL 5 GHI 4
DEF 3 ABC 2 1
# OPER 0 TONE *
MUTE FLASH HOLD
CHARGE
IN USE
PAGE INTERCOM
SPEAKER
RE/PA
FORMAT PROGRAM VOICE
MAIL HOLD
DEL DIAL REVIEW
MEMORY
M3
M2
M1
ONE TOUCH QUICK DIAL