Using the speaker bar, Power management, Energy declaration – Gateway FHD2400H Manuel d'utilisation

Page 22: Maintaining, Using the speaker bar power management

Advertising
background image

Using Your Gateway Flat-Panel Monitor

18

Using the speaker bar

To turn on the speaker bar:

The speaker bar is always on. If you connected the speaker bar by following the instructions
in

“Setting up the optional speaker bar” on page 5

, the speaker bar receives power constantly

from the monitor’s speaker bar power connector.

To use headphones:

Plug headphones into either of the speaker bar’s headphone jacks. The speaker bar’s volume
is muted, and sound is played through the connected headphones. You can connect
headphones to both headphone jacks, and sound plays out of both sets of headphones.

Power management

Energy declaration

When connected to a computer that supports the VESA Display Power Management Signaling
(DPMS) Protocol, the monitor can conserve significant energy by reducing power consumption
during periods of non-use. When your computer goes into the energy saving mode, the monitor
will then enter the Active Off mode (sleep). In the Active Off mode the Power LED will still show
orange.
Use these conventions and the power can be reduced to the following levels:

To “wake” the monitor when it is in Standby/Active Off mode, move the mouse or press any
keyboard key. You can change the monitor’s power management settings using the Windows
Control Panel. For more information, see your computer’s User Guide.

Maintaining

To keep the monitor in optimal working order:

Do not block the ventilation holes.

Do not expose the monitor to rain or use near water.

Keep the monitor away from radiators or heat vents.

Keep the monitor out of direct sunlight.

To clean the monitor, use a soft cloth slightly moistened with water only. Wipe the cabinet,
screen, and controls.

Important

If you connect the speaker bar to the monitor while the monitor is turned on, the

speaker bar will not initialize and will not work correctly. If this happens, turn the monitor
off, then back on to enable the speaker bar.

VESA State

LED Indicator

Power Consumption

On

Blue

<150 W

Standby

Orange

<2 W

Off

Purple

<1

W

Caution

Do not use any type of abrasive pad or glass cleaner. You will permanently

scratch the screen.

Advertising