Gateway FHD2400H - Manuel (Page 14)

Using Your Gateway Flat-Panel Monitor
10
6 To mute the volume of the sounds accompanying button presses, touch the (Menu)
button on the front of your monitor, touch (Main Menu), touch (Advanced), touch
(Audio Feedback), then touch the lower (Adjust) buttons until the volume bar is at
the bottom of the scale.
7 Use the on-screen display (OSD) to adjust other monitor settings. For more information, see
“Adjusting monitor settings” on page 10 .
Adjusting monitor settings
Use the monitor controls (located on the monitor itself) and computer controls (accessible through
Windows) to adjust the display image. For more information about computer controls, see
“Changing Windows screen settings” on page 16 .
Using the EzTouch menu buttons
This monitor features an on-screen display (OSD) and EzTouch menu buttons that let you adjust
contrast, brightness, and other settings for the monitor. The monitor saves changes you make to
the settings, even if you turn off the monitor. Your monitor has two levels of menus, and the
functionality of the touch buttons depends on the menu that is currently open:
• The shortcut menu (the first menu that appears) lets you quickly change some of the most
commonly accessed settings.
• The main menu lets you precisely adjust all levels of settings.
Using the shortcut menu
To use the shortcut menu:
1 Touch (Menu) on the front of your monitor. The rest of the button icons light up and the
shortcut menu opens. (The menu’s appearance and choices vary, depending on the currently
active video input and whether the speaker bar is attached.)
Important
The buttons are very sensitive, and may be “pressed” by holding your finger
just above its surface. To completely “release” a touch button, make sure that you
lift your finger well away from the button.