GE Monogram MONOGRAM ZBD6800 - Manuel (Page 11)

LEVEL DISHWASHER
IMPORTANT
— Dishwasher must be level
for proper dish rack operation and wash performance.
• Place level on door
and rack track inside
the tub as shown to
check that the
dishwasher is level.
• Level the
dishwasher by
adjusting the
four leveling legs
individually.
• Make sure 1/2"
minimum gap is
maintained (see
Figure V).
• If adjustment to the right rear leveling leg is required,
gain access by loosening junction box bracket screw
(through the access hole) and rotate bracket
clockwise.
TIP: Pull lower rack out, about halfway. Check to
be sure the rack does not roll forward or back into
dishwasher. If the rack rolls in either direction, the
dishwasher must be leveled again.
• If the door hits the tub, the dishwasher is not installed
correctly. Adjust leveling legs to align door to tub.
STEP 11
11
Check
Level
Side
To Side
Check
Level
Front
to Back
Turn Legs
to Adjust
Access Hole
Installation Instructions
Figure W
Figure X