Troubleshooting tips, Before you call for service – GE JGP636 Manuel d'utilisation

Page 13

Advertising
background image

13

Safety Instructions

Operating Instructions

Care and Cleaning

Tr

oubleshooting T

ips

Consumer Support

Before you call for service…

GEAppliances.com

Troubleshooting Tips
Save time and money! Review the chart on this page first
and you may not need to call for service.

Problem

Possible Causes

What To Do

Burners have yellow or

The combustion quality of

• Use the illustrations below to determine if your burner

yellow-tipped flames

burner flames needs to be

flames are normal. If burner flames look like A, call for

determined visually.

service. Normal burner flames should look like B or C,
depending on the type of gas you use. With LP gas, some
yellow tipping on outer cones is normal.

A–Yellow flames

B–Yellow tips

C–Soft blue flames

Call for service

on outer cones

Normal for natural

Normal for LP gas

gas

Control knobs

Controls improperly set.

• To turn from the OFF position, push the knob in and

will not turn

then turn.

Burners do

Plug on cooktop is not

• Make sure electrical plug is plugged into a live, properly

not light

completely inserted in the

grounded outlet.

electrical outlet.

Gas supply not connected

• See the Installation Instructions that came with your

or turned on.

cooktop.

A fuse in your home may be

• Replace the fuse or reset the circuit breaker.

blown or the circuit breaker
tripped.

Igniter orifice in burner body

• Remove the obstruction. See the Care and cleaning of

may be clogged.

the cooktop section.

Burner parts not replaced

• See the Care and cleaning of the cooktop section.

correctly.

Hole in burner top behind

• Use a small sewing needle to unplug.

the igniter may be clogged.

Ticking sound of spark

Control knob is still

• Turn the knob out of the LITE position to the desired

igniter persists after

in the LITE position.

setting.

burner lights

• Turn the burner off and relight. If ticking is still

present, call for service.

Ticking sound persists

Be sure the knob is in the

• Remove knob by pulling it straight off the stem and

after burner is turned off OFF position.

check the bottom of the knob for any buildup of soil.

Burner flames very

Improper air to gas ratio.

• If cooktop is connected to LP gas, check all steps

large or yellow

in the Installation Instructions that came with
your cooktop.

Advertising
Ce manuel est liée aux produits suivants: