GE JGP636 - Manuel (Page 12)

12
Our testing shows that if you are cooking
high sugar mixtures such as jelly or fudge
and have a spillover, it can cause permanent
damage to the glass surface unless the
spillover is immediately removed.
Turn off all surface burners and,
with an oven mitt, remove hot pans
and grates.
Wearing an oven mitt:
■
Use a razor scraper to move the spill
to a cool area on the surface.
■
Remove the spill with paper towels.
Any remaining spillover should be left
until the surface of the cooktop has
cooled.
Don’t use the surface units until all
of the residue has been completely
removed.
NOTE: If pitting or indentation in the glass
has already occurred, the cooktop glass will have to
be replaced. In this case, service will be necessary.
Damage from Sugary Spills and Melted Plastic
Be careful not to slide pots and pans
across your cooktop. It will leave
metal markings on the cooktop
surface.
These marks are removable using
the cleaning cream with a scrub pad
and/or razor scraper.
If pots with a thin overlay of
aluminum or copper are allowed to
boil dry, the overlay may leave black
discoloration on the cooktop.
This should be removed immediately
before heating again or the
discoloration may be permanent.
WARNING: Carefully check the bottom of pans for
roughness that would scratch the surface.
Metal Marks and Scratches
To order Cerama Bryte ® cooktop cleaning
cream and the razor scraper, please call our
toll-free number 800.626.2002.
Cerama Bryte ® Cooktop
Cleaning Cream . . . . . . . . . . . . . .# WX10X300
Razor Scraper . . . . . . . . . . . . . . .# WX5X1614
Kit . . . . . . . . . . . . . . . . . . . . . . . . .# WB64X5027
(Kit includes cream and razor scraper)
To Order Parts
Cleaning the glass cooktop surface.
(on some models)
Glass surface—potential for permanent damage .
Safety Instructions
Operating Instructions
Care and Cleaning
Tr
oubleshooting T
ips
Consumer Support