GE JGP328 - Manuel (Page 10)

E1
Installation Instructions
10
The electrode of the spark igniter is exposed. Be careful not to push any cooktop controls while
the top of the burner is removed. Do not remove the top or touch the electrode of any burner
while another burner is turned on. Electrical shock might result.
Assembling the Cooktop Burners
For Porcelain Cooktops
a. Place the burner head on the burner base
so that the pins match up with the slots on
the base.
b. Position the burner cap on the burner head.
c. Place the burner grate over the burner
assembly on the porcelain units. The
bottoms of the burner grates have feet that
fit into corresponding indentations in the
cooktop.
For Glass Ceramic Cooktops
a. Place the burner head on the burner base
so that the pins match up with the slots on
the base.
b. Position the burner cap on the burner head.
c. Place the burner grate over the burner
assembly on the ceramic units. The grate fits
over the raised area on the burner head.
BURNER
GRATE
BURNER BOX
BOTTOM
BURNER
CAP
BURNER
HEAD
BURNER
BASE
SPARK
IGNITER
SPARK
IGNITER
BURNER
GRATE
GLASS MAINTOP MAINTOP
FRONT TRIM
BURNER
CAP
BURNER
HEAD
BURNER
BASE
SPARK
IGNITER
SPARK
IGNITER
Cooktop Burners E