GE 42 - Manuel (Page 26)

3-1/8" Min.
1/4"
Max.
Required for Optimal
Handle Clearance
3-1/8"
3-1/8"
5/16"
5/16"
A
B
A
B
A
B
2-1/2"
3/4
″ FULL-WIDTH OVERLAY CUSTOM PANELS
This panel design provides a nearly trimless appearance.
Assemble the spacer panel onto the backer panel. Allow 1/2
″ clearance on all four sides of the
grille spacer panel. Allow 1/2
″ clearance on the top and hinge side, 15/16″ on the bottom and 3-5/8″
on the handle side of the upper freezer door panel. Allow 15/16
″ on the top, 1/2″ clearance on the
bottom and hinge side and 3-5/8
″ on the handle side of the lower freezer door panel. Secure the
panels with glue. Be sure to observe clearances on all sides.
Secure the appearance panel to the assembled backer/spacer panel. Use glue
and screws. Countersink screws into the backer panel.
Grille Panel
Lower Freezer Panel
Upper Freezer Panel
Installation Instructions
26
42 ″ Models A B
1/4 ″ Backer Panel 39-15/16 ″ 10-3/4 ″
0.10 ″ Spacer Panel 38-15/16″ 9-3/4 ″
3/4 ″ Overlay Panel 40-3/16″ 11 ″
48 ″ Models A B
1/4 ″ Backer Panel 45-15/16 ″ 10-3/4 ″
0.10 ″ Spacer Panel 44-15/16″ 9-3/4 ″
3/4 ″ Overlay Panel 46-3/16″ 11 ″
42 ″ Models A B
1/4 ″ Backer Panel 16-7/16 ″ 35-1/8 ″
0.10 ″ Spacer Panel 12-5/16″ 33-11/16 ″
3/4 ″ Overlay Panel 13-7/16″ 34-15/16 ″
48 ″ Models A B
1/4 ″ Backer Panel 18-7/16 ″ 35-1/8 ″
0.10 ″ Spacer Panel 14-5/16″ 33-11/16 ″
3/4 ″ Overlay Panel 15-7/16″ 34-15/16 ″
42 ″ Models A B
1/4 ″ Backer Panel 16-7/16 ″ 17-13/16 ″
0.10 ″ Spacer Panel 12-5/16″ 16-3/8 ″
3/4 ″ Overlay Panel 13-7/16″ 17-5/8 ″
48 ″ Models A B
1/4 ″ Backer Panel 18-7/16 ″ 17-13/16 ″
0.10 ″ Spacer Panel 14-5/16″ 16-3/8 ″
3/4 ″ Overlay Panel 15-7/16″ 17-5/8 ″
3-5/8"
15/16"
1/2"
1/2"
Spacer
Panel
Finished
Backer Panel
3-5/8"
1/2"
15/16"
1/2"
Spacer
Panel
Finished
Backer Panel
Upper Freezer Panel
Spacer Assembly Lower Freezer Panel
Spacer Assembly