FUJITSU S SERIES - Manuel (Page 92)

Settings in BIOS Setup
82 A26391-K144-Z120-1-7619, edition 2
Operating BIOS Setup
i
Press the F1 key to display help on the operation of BIOS Setup.
The description of the individual settings is shown in the right-hand window of the BIOS
Setup.
You can revert to the default settings for the BIOS Setup menu you are currently in, by
using the F9 function key.
► Use the cursor key ! or " to select the menu you wish to access to make changes.
► Press the Enter key.
The menu is displayed on the screen.
►
Use the cursor key # or $ to select the field you wish to change.
► Press the Enter key to confirm your selection.
► Press the ESC key to exit the selected menu.
► For future reference, make a note of the changes you have made (for example, in this
manual).
Exiting BIOS Setup
To exit BIOS Setup, select the Exit menu from the menu bar. You can then decide which settings you
want to save. The Exit menu offers the following options.
You must mark the required option and activate it with the Enter key.
Exit Saving Changes
Select Exit Saving Changes and Yes to save the current settings and exit the BIOS Setup. The device is
rebooted and the new settings come into effect.
Exit Discarding Changes
Select Exit Discarding Changes and Yes to discard the changes you have made. The settings which
were in force when BIOS Setup was called remain effective. BIOS Setup is terminated and the device
is rebooted.
Load Setup Default
To revert all the menus of BIOS Setup to the default entries, select Load Setup Default and Yes.
Discard Changes
To load the values of all the menus of BIOS Setup that were in effect when BIOS Setup was called,
select Discard Changes and Yes. If you want to exit BIOS Setup with these settings, select Exit Saving
Changes and Yes.
Save Changes
To save settings without exiting BIOS Setup, select Save Changes and Yes.