FUJITSU S SERIES - Manuel (Page 16)

Important notes
6 A26391-K144-Z120-1-7619, edition 2
Energy saving
If you will not be using your notebook, switch it off.
Make use of the device's energy saving functions (see "Working with the notebook"). The notebook
uses less power when the power management features are enabled. You will then be able to work
for longer before having to recharge the battery.
If a monitor with energy saving features is connected to your notebook, you can use the Screen Saver
tab to activate the energy saving features of the monitor. Select the following item in the start menu:
Settings - Control Panel - Display - Display Properties - Screen Saver - Energy saving functions for the
display. You can set additional energy saving functions in the start menu by selecting the following
item: Settings - Control Panel - Energy - Extended.
Storing the battery
Store the battery in a fully charged state. The battery should be stored in a dry area at a temperature
between 0°C and +30°C. The lower the temperature at which the batteries are stored, the lower is
the rate of self-discharge.
If storing for a long period of time (longer than two months) batteries should be fully charged before
storage.
To be able to make use of the optimal charging capacity of the batteries, the battery should be
completely discharged and then fully recharged.
i
If you do not use the batteries for long periods, remove them from the notebook. Never
store the batteries in the unit.