Hunter Fan 37203 - Manuel (Page 8)

43000-01 06/02/2006 © 2006 Hunter Fan Company 8
Boiler
Cover
Boiling
Chamber
Boiler
Base
4. Place the Boiling Chamber into an empty sink
and carefully lift the Boiling Chamber Cover
by pressing the Chamber Cover Release Tab.
This will expose the Heater. Drain all water
and rinse with cool, clean water. Use a soft
brush or sponge to clean the Boiling Chamber
and the Boiling Chamber Cover.
5. Pour one (1) cup of white vinegar into the
Boiling Chamber and allow it to soak for
20-30 minutes. Rinse several times with cool,
clean water. Wipe the Boiler clean if necessary.
6. Before reinstalling the Boiling Chamber, make
sure the three metal pins in the Chamber are
clean and completely dry. Place the Boiling
Chamber Cover into the Boiling Chamber and
slide the Chamber slowly back into place.
Make sure the Chamber fits properly in the
Base.
7. To disinfect the Water Tank, create a solution
of one (1) cup of white vinegar and one (1)
gallon of clean water. Fill the Water Tank
with the solution and allow it to soak for 20
minutes, occasionally swishing the solution to
wet all interior surfaces. Empty the Water Tank
completely and rinse with clean water several
times. Refill the Water Tank with cool, clean
water and place it back on the humidifier
Base.
8. NEVER use any metal or hard object, which
could cause scratching of the humidifier
surface, to clean plastic parts. NEVER use
gasoline, kerosene, glass cleaner, furniture
polish, paint thinner, or other household
solvents to clean any part of the humidifier.
9. The Water Tank should be drained EACH DAY,
rinsed, and refilled with clean tap water.
10. To clean the exterior surfaces, use a solution
of water and mild detergent with a damp
cloth. Rinse the surfaces with clean water and
dry with a cloth. Allow sufficient time to dry
before plugging the electrical cord back into
the outlet.
11. Place the Water Tank back onto the Base and
resume normal use.
Base
Water
Tank
43000_WM MechHum_06.02.06.indd 6/2/06, 11:16 AM 8