HP 5500c - Manuel (Page 8)

install the scanner
3
connect the
scanner first
(Windows
only)
1 Make sure that your computer is on and that the operating system is
running.
2 Connect the USB cable between the USB port on the scanner and the USB
port on the computer.
3 Connect the power cable between the scanner and a surge protector or a
grounded wall outlet that is easy to reach. This turns on the scanner.
4 Follow the prompts in the New Hardware Found wizard.
5 Insert the HP Photo & Imaging software CD-ROM and click Next. If the
wizard prompts you for a drive letter, select your CD-ROM drive.
6 In the HP Scanjet installation program, follow the instructions.
7 After installation is complete, another HP installation program starts. You
can install additional software, register your scanner, and find additional
help. To see if your scanner came with additional software, click Install
software and follow the prompts.
connect
USB cable
to computer
connect USB
cable to
scanner
P_usermanual.book Page 3 Monday, May 6, 2002 6:26 PM