Emerson CKD3630C - Manuel (Page 9)

1 6
PROGRAMMED PLAYBACK
Use the Programmed Playback feature to play up to 20 tracks on a disc in any
desired order. You may also program a particular track to play several times within
a programmed sequence if desired.
Note: You cannot program a disc while it is playing. Press the STOP button
to stop playback and then follow the programming steps below.
1.) Load your disc as usual and wait until the display
shows the total number of tracks on the disc.
2.) Press the PROGRAM button on the front panel.
The PROG. indicator flashes and Track number
м0о begins flashing in the display.
3.) Press the SKIP FWD. or SKIP REV. buttons to select the first track
number to be programmed.
Example: Track number 7.
When the desired track number appears in the display press the PROGRAM
button again.
Track 7 is now entered in Program Memory
number м01о. The Track number display returns
to the flashing м0о.
4.) Repeat step 3, selecting a different track number
each time until you have entered up to 20 tracks
in the program memory.
To confirm the program after you have entered the last track press the
PROGRAM button repeatedly. The display will scroll through all the tracks you
programmed in sequence.
PROG.
1 7
5.) When you have completed programming the desired tracks press the PLAY/
PAUSE button to begin programmed playback.
The PLAY/PAUSE indicator comes ëOní and the
PROG. indicator continues flashing.
Playback will begin on the first track you programmed and will continue until
the last programmed track has played.
6.) When the program is completed the player stops and the display again briefly
shows the total tracks on the disc and then returns to the correct time. However
the program sequence remains in the memory.
To repeat the program sequence press the PROGRAM button and then press
the PLAY/PAUSE button again.
To cancel the Programmed sequence from memory, press the PROGRAM
button and then press the STOP button while the player is stopped. The
Program indicator goes ëOffí.
Programmed Playback may also be canceled by switching to Radio function,
opening the CD door, or pressing the POWER ON/OFF button to shut the
power ëOffí.
PROGRAMMED REPEAT PLAYBACK
You may use the Programmed Playback and Repeat features together to
continuously repeat a programmed sequence.
First program the desired sequence according to steps 1 through 4 above.
When Programmed Playback begins press the REPEAT button twice to select the
Repeat All Tracks mode.
The REPEAT and PLAY/PAUSE indicators
remain ëOní. The PROG. indicator flashes.
The programmed sequence will be repeated continuously.
PROG. PLAY/PAUSE
FM ST.
PROG. PLAY/PAUSE REPEAT
FM ST.