Electrolux EDC 77550W - Manuel (Page 22)

22 electrolux something not working
Drying cycle lasts an
unusually long time.
Note:
After around 5 hours
the drying cycle ends
automatically (see
„Drying cycle complete“)
●
Lint filter clogged.
●
Heat exchanger clogged with
lint.
●
DELICATE button pressed
and load volume too big.
●
Load volume too big.
●
Laundry insufficiently
predrained.
●
Clean lint filter
●
Clean heat exchanger.
●
DELICATE is only suitable for
use with loads of up to 3 kg!
●
Reduce load volume.
●
Laundry must be adequately
pre-drained.
Malfunction Possible cause Solution
When pressing a button,
the corresponding
button flashes several
times.
●
Washing protection.
After the start of the program-
me, the option can no longer
be set.
●
Turn the programme knob to
OFF. Set the programme
again
Drum light does not
work
●
Programme selector in OFF
position.
●
Defective light bulb
●
Turn programme selector to
LIGHT or to any programme
●
Replace light bulb (see next
section).
Programme inactive,
W Wa atte err rre es se errv vo oiirr ffu ullll
light illuminated.
●
Condensate tank is full.
●
Empty condensate tank, then
start programme with
button.
Drying cycle ends
shortly after programme
starts. END
light illuminated.
●
Not enough washing loaded
or washing loaded is too
dry for selected programme.
●
Select time programme or
higher drying level (e.g. EXTRA
DRY instead of STRONG).
When a button is
pressed, Err appears in
the multi-display.
●
Washing protection. After the
start of the programme, the
option can no longer be set.
●
Turn the programme knob to
OFF. Set the programme again.