Emerson NR290TTC - Manuel (Page 19)

18
Playing Records
This system includes a full-size, 3-speed, belt-drive turntable. You can play 33,
45, and 78 rpm records.
Turn the OFF-VOLUME control clockwise until a click is heard, and set
the Volume to a low level.
1.)
, ,
Set the Function (AM/FM/TAPE/CD/PHONO) selector to the PHONO
position.
2.)
Make sure that you have removed the stylus cover from the stylus and
have released the Tone Arm Lock that secured the tone arm to the tone
arm rest.
3.)
Set the turntable Speed Selector to the appropriate speed, 33, 45, or 78
rpm. If you are playing 45 rpm singles , place the 45 rpm adapter on the
centre spindle.
4.)
, ,
Place your record on the centre spindle. 5.)
Raise the Cue lever to lift the tone arm off its rest. Move the tone arm to the
edge of the record. The turntable starts automatically. Use the Cue lever to
gently lower the tone arm onto the record.
6.)
Adjust the OFF-VOLUME control to the desired level. 7.)
When the tone arm reaches the end of the record it automatically returns to
the tone arm rest and the record player stops.
8.)
To turn the system off , rotate the OFF-VOLUME control counter
clockwise until a click is heard. The POWER indicator goes off .
9.)
, ,
, , , ,
NOTE: Do not turn or stop the turntable manually. Moving or jarring the
Turntable without securing the Tone Arm clamp could result in damage to the
Tone Arm.