Maintenance, Cleaning rear filter – Roborock H7 FCC Manuel d'utilisation

Page 24

Advertising
background image

24

5. Gently push the dustbin in the direction shown until you hear a

click signaling that it is secured.

1. Remove the Rear Filter by turning it counterclockwise then

pulling it off.

2. Rinse the Rear Filter inside with water, rotating it while rinsing

to clean between all gaps. Lightly tap the filter against the sink

after rinsing to dislodge any remaining dirty water.

3. Repeat this process 4-5 times or until the filter is clean.

4. Allow 24 hours for the filter to dry thoroughly.

Cleaning Rear Filter

24

* Washing the Rear Filter every two months is recommended

Maintenance

Advertising