Curtis SDPF870 - Manuel (Page 6)

5
2. Getting Started
2.1 Remove the protective film covering the LCD.
2.2. Plug one end of the included AC adapter into a standard 110-240V AC electrical
outlet and the other end into the DC in of the frame.
2.3.
Unplug any one end of the adaptor to power of,or press power button on back of the
unit.
3. Operating Instruction
3.1 Card and USB
Note: Make sure there are supported picture files in the Card or USB device.
After turning on the unit, it will show the
startup picture, then slideshow will
automatically play pictures from the
built-in memory when there is no card
inserted. If there is a card or USB
device, it will slideshow pictures from
the card or USB.
It supports SD/SDHC/MMC and USB
2.0. After inserting a card or USB
device,
slideshow will play
automatically, then press MENU twice
to access to Photo, File, Calendar and
Setup interface. Press to confirm.
If there is no picture in built-in memory
and there is no card or USB device,
after turning on the unit, it will show the
card select interface after the startup
picture.