Curtis FRW482C - Manuel (Page 6)

5
OPERATION
Ensure that the appliance is placed on a flat and stable surface.
Plug the appliance into the mains socket. The display will illuminate and then show the default
factory temperature setting of 12°C.
Allow the appliance to cool down for 2-3 hours before placing wine bottles in the appliance.
Selecting the temperature
The temperature can be set from 5°C to 20°C.
1. Repeatedly press / to select the required temperature.
 Each time you press / the temperature will be increased or decreased by 1°C.
2. The temperature selected will flash on the display for approximately 5 seconds, then the
display will return to the current actual temperature of the internal cabinet.
 The current actual temperature will vary depending on the quantity of bottles stored and
how often the door is opened.

To view the set temperature, press /, the set temperature will flash on the display for
approximately 5 seconds.
Interior light
Press light button to turn the interior light on or off.
The interior light will automatically turn off after approximately 10 minutes if you leave the
light on.
OPERATING NOISES
Normal noises

Motors are running.
 Refrigerant is flowing through the tubing.
TIPS FOR SAVING ENERGY
For the most energy efficient use of your appliance:

Ensure your appliance has adequate ventilation as recommended in the installation
instructions.

Keep door openings to a minimum.
 Open the appliance as briefly as possible.
 Ensure that the door is always closed properly.