Curtis FRW183 - Manuel (Page 15)

z Securely tape down all loose items inside your thermoelectric cellar.
z Turn the leveling legs up to the base to avoid damage.
z Tape the door.
z Be sure the thermoelectric cellar stays in the upright position during transportation.
IX Problems Disposal
You can solve many common thermoelectric cellar problems easily, saving you the cost of a
possible service call. Try the suggestion below to see if you can solve the problem before
calling service center.
PROBLEM POSSIBLE CAUSE
thermoelectric cellar do not
operate.
Not plugged in using different voltage. The circuit
breaker tripped or a blown fuse.
thermoelectric cellar is not cold
enough.
Check the temperature control setting.
External environment may require a higher
setting.
The door is open too often.
The door is not closed completely.
The door seal does not seal properly.
The thermoelectric cellar does not have the
correct clearance.
The light does not work. Check the service center.
Vibrations. Check to assure that the thermoelectric cellar is
level.
The thermoelectric cellar seems
to make to much noise
The thermoelectric cellar is not level.
Check the fan.
The door will not close properly. The thermoelectric cellar is not level.
The doors were reversed and not properly
installed.
The seal is weak.
The shaves out of position.
LED could not display. Main control board does not work.
PCB Problem.
There is some problem with the plug.
LED display error. Weak quality of display.
Temperature point is out off.