Elmo TT-02 - Manuel (Page 29)

29
VA
RIOUS
FUNCTIONS AND
OPERA
TIONS
English P1~P32
Save/call setting
The operation status of the unit can be saved/called in the memory. The unit saves 4
conditions (1-3, ON setting) and the storable condition are as follows.
■ How to save setting
Selecting [Preset]
→ [1] ~ [3] in the OSD menu saves the
current unit condition in the selected number.
Selecting [Preset] → [Power On] in the OSD menu saves the
setting to be called when the power switch of the main unit is
ON.
■ How to call setting
Selecting [Call]
→ the memory number for the OSD provides
the setting for the selected number.
Selecting [Call] → [Power On] for the OSD provides the
setting for the power supply ON.
Selecting [Call] → [Default] for the OSD provides the factory
default setting.
Note
The saved conditions are retained even if the power is turned OFF.
SELECT
Gamma
Preset
Call
Guide
Language
1
2
3
Power On
MENU OK
SELECT
Gamma
Preset
Call
Guide
Language
1
2
3
Power On
Default
MENU OK
Note
The status of a presentation done with microscope can not be saved.
The status of image rotation can be saved only to [1] ~ [3]. (Not to [Power ON])
Zoom angle of view in digital zoom mode can not be saved. When the status saving is
done in digital zoom mode, saved zoom angle of view is the maximum TELE position
[Zoom-IN ] of optical zoom.
• Current zoom angle of view
(The range of the optical zoom)
• Brightness
• Mode setting
• Edge enhancement
(in Graphics mode)
• Gamma value setting
(in Graphics mode)
• Status of image rotation
• Status of white balance
• Intensity of red color
(when selecting [White Balance]
→ [Manual])
• Intensity of blue color
(when selecting [White Balance]
→ [Manual])
• Posi/Nega setting
• Color/B&W switch setting