Elmo TT-02 - Manuel (Page 21)

21
OPERA
TION
PR
OCEDURE
English P1~P32
Shooting a 3-D object
By adjusting angle of the camera column and the camera head, a 3-D object can be shot from
the side.
Adjust
Adjust
Adjust
Setting the main unit
Connect the main unit to a projector or a PC monitor.
Then turn the power switch of the main unit ON. Adjust angle of the camera column and the
camera head as shown in the above figure to shoot a 3-D object.
Adjusting the size
Adjust the position of the object with the zoom dial so that the objective part fits the screen
size.
Adjusting the focus
Press the [AF] button to focus the camera. In a case when the object can not be brought
into focus with the [AF] button, adjust focus with the manual focus by selecting [Focus] in
the OSD menu.
P.24
Adjusting the brightness
Press the [BRIGHTNESS • ] and [BRIGHTNESS • ] buttons on the main unit to
adjust image brightness.
P.26
Note
• The focus can be achieved from 50mm to
∞.