Emerson NR101TTC - Manuel (Page 12)

11
PLAYING RECORDS
This system includes a full-size, 3-speed, belt-drive turntable. You can play 33, 45,
and records. 78 rpm
2.) Set the Function selector to the position. (AM/FM/PHONO) PHONO
3.) Make sure that you have removed the stylus cover from the stylus and have
released the Tone Arm Lock that secured the tone arm to the tone arm rest.
N O T E : D o n o t t u r n o r s t o p t h e t u r n t a b l e m a n u a l l y. M o v i n g o r j a r r i n g t h e
Tu r n t a b l e w i t h o u t s e c u r i n g t h e To n e A r m c l a m p c o u l d r e s u l t i n d a m a g e
t o t h e To n e A r m .
1.) Turn the control clockwise until a click is heard, and set the
Volume to a low level.
OFF-VOLUME
, ,
4.) Set the turntable Speed Selector to the appropriate speed , or RPM.
If you are playing 45RPM singles , place the 45RPM adapter on the center
spindle.
33, 45 78
, ,
5.) Place your record on the center spindle.
6.) Raise the CUE lever to lift the Tone Arm off its rest. Move the tone arm to the
edge of the record. The turntable starts automatically. Use the CUE lever to
gently lower the tone arm onto the record.
7.) Adjust the control to the desired level. OFF-VOLUME
8.) When the tone arm reaches the end of the record it automatically returns to the
tone arm rest and the record player stops.
9.) To turn the system off, rotate the control counter clockwise until
a
OFF-VOLUME
click is heard.
, ,
, ,