Scanning film, Using the film holders – Epson Perfection R200 Manuel d'utilisation

Page 6

Advertising
background image

6

Scanning Film

8. Click the

Scan

button.

After your photo is scanned, you can make more adjustments in Photoshop
Elements or save your file.

Scanning Film

Your scanner includes four film holders. Each film holder allows you to scan
multiple images at once. You can scan up to twenty-four 35mm filmstrip images,
eight 35mm slides, three 120/220 (6

×

12 cm) film images, or two 4

×

5 film

images.

Using the Film Holders

To scan film, you’ll need to remove the reflective document mat and place the film
in a holder.

1. Make sure the transparency unit cable is connected to the option interface

connector on the back of the scanner. (If it is not connected, turn off the
scanner, connect the transparency unit cable, then turn the scanner back on.)

2. Lift the scanner lid all the way up and pull

the reflective document mat up and off of
the scanner lid, as shown.

4870booklet.fm Page 6 Tuesday, December 2, 2003 9:09 AM

Advertising