Dolmar Gasoline Chain Saws PS-510 Manuel d'utilisation

Page 35

Advertising
background image

35

14

B

15

C

Replacing the fuel filter

The felt filter (15) of the fuel filter can become clogged.

It is recommended to replace the fuel filter once every

three months in order to ensure unimpeded fuel flow to the

carburetor.
To remove the fuel filter for replacement, pull it out through

the tank filler neck using a piece of wire bent at one end to

form a hook.

17

16

D

Replacing/cleaning the spark arrester screen

The spark arrester screen should be checked and cleaned

regulary. Loosen the screw (16) and remove the spark arrester

screen (17).
Caution: Do not use sharp or pointed objects for screen cleaning.

Damaged or misformed screen wires may result.
Reassembly the spark arrester screen and tighten the screw.

Replacing/cleaning the spark arrester screen

Models with catalytic converter
The spark arrester screen should be checked and cleaned

regulary. Loosen the two screws (16) and remove the spark

arrester screen (17).
Caution: Do not use sharp or pointed objects for screen cleaning.

Damaged or misformed screen wires may result.
Reassembly the spark arrester screen and tighten the two

screws.
Information on the catalytic converter: The catalytic converter

reduces the pollutant content of the exhaust.

Cleaning the cylinder area

After prolonged use, dirt and sawdust can build up on the cylin-

der and cause the engine to overheat. The cylinder fin cleaner

helps remove deposits between the cylinder fins and between

the cylinder and the mounting plate.
Remove cover.
Remove the fan housing.
CAUTION: To prevent eye injury, always wear eye protection

when cleaning the filter with compressed air!
The entire area (14) can now be brushed clean or cleaned with

compressed air.
A bottle brush can come in handy for cleaning out the cylinder

ribs.

With the cyinder ribs cleaner (only in delivery for model PS-

505, PS-505 H), clean out the area between the cylinder

ribs and between the cylinder and the mounting plate.

Do not use force. Be careful not to damage the short-circuit

wire and the ignition wire.

17

16

Advertising