Paradigm SUB 2 - Manuel (Page 23)

18
Your PBK Kit includes:
• Paradigm
® Perfect Bass Kit (PBK) software installation CD
• Microphone and microphone clip
• Telescoping stand and base
• Two USB cables: one for microphone, one for subwoofer
Steps to assemble stand and microphone:
1. Screw the telescoping stand into the base and tighten securely;
2. Position the clip vertically and screw onto the stand, tighten;
3. Connect the USB microphone cable to the microphone;
4. Slide the microphone into the clip and point microphone straight up
(see section ‘Positioning the Microphone’ for more information).
How does PBK do what it does?
The process starts when a test signal is sent from your computer
to the subwoofer and the signal is picked up by the individually
calibrated microphone. The system puts the subwoofer through
a frequency sweep to highlight problem areas and determine
necessary adjustments. It asks you to position the microphone in
at least 5 different locations. Configurations are then saved on
the connected PC. The optimized solutions are calculated, then
uploaded to the subwoofer and the calculated room corrections
are put in place.
1
= 1 st First Measuring Position
1
ROOM PLACEMENT &
THE PARADIGM PERFECT BASS KIT ™
(continued)