Getting the best from my paradigms – Paradigm MilleniaOne 3.0 System Manuel d'utilisation

Page 6

Advertising
background image

Break-In

Although your Paradigms will sound great right out of the
carton, they will sound even better when broken in. Let
them operate for several hours before you listen critically.
High-frequency drivers use ferro-fluid that can thicken at
temperatures below 10°C (50°F), so if the speakers have
been transported or stored in the cold, allow them to
warm to room temperature before you listen.

Cleaning

Use a damp (not wet!) soft cloth to clean. Never use a
strong or abrasive cleaner on your Paradigms—you’ll ruin
that fabulous finish.

The Room’s Effect

Your Paradigms will deliver sensational sound almost any-
where. However, it’s important to note that listening room
construction, room dimensions and even your furniture

play a part in the quality of sound. Keep the following
guidelines in mind:

• Mid and high frequencies are affected by the amount

of curtains, carpets, sofas, wall coverings, etc. An excess
of the soft stuff can result in a dull sound, but don’t start
tossing things because typically, the furnishings found in
most living rooms provide the right acoustic character-
istics to allow the speakers to sound balanced;

• Concrete floors and walls aggravate low-frequency

standing wave problems so are less preferred;

• Rooms where height, width and length are similar

should be avoided as they can exhibit significant low-
frequency standing wave problems. This may result in
reduced clarity. If no other room is possible, experiment
with speaker placement to minimize acoustic problems.

pg

2

You already have the best speaker brand in the world, but to get the best out of your Paradigms take a moment to
read the following …

Getting the best from my Paradigms

Advertising
Ce manuel est liée aux produits suivants: