Paradigm Cinema 90 CT System - Manuel (Page 5)

Fig. 8
7
1
2
YOUR NEW SPEAKERS
Cinema ™ speakers are magnetically shielded (except ADPs) for use close to a television or video
screen. Keyhole slots on the rear of speakers allow them to be mounted on a wall (hardware not
included). They also have holes spaced 60 mm apart in the backs of their enclosures which allow
for wall mounting with included brackets (some models) or with a variety of PREMIER
™ brackets
(optional extra—see your Authorized Paradigm ® Dealer for more information).
If wall mounting, take extra care in installation—always use safety straps as secondary restraints.
Your speakers can also be placed on a bookshelf or desk, or mounted on optional PREMIER
™
speaker stands that are both elegant and functional (see your Dealer ).
POWER REQUIREMENTS
The ‘Watts’ (W) rating indicated on the rear panel is the maximum AC power your subwoofer will
draw when producing its maximum power output. However, the actual wattage draw will vary with
the bass content of the program material.
HOW TO AVOID SPEAKER DAMAGE
Use an appropriate amplifier. At high volumes, a very powerful amplifier can overdrive
your speakers and damage them. On the other hand, if your amplifier isn’t powerful enough, it
can produce clipping distortion that can easily damage high-frequency drivers. (See your Dealer.)
Don’t be fooled by your amplifier’s volume control. It adjusts listening level—it does not
indicate power output. If your speakers begin to sound harsh or grating, or if you hear the bass
breaking up, turn the volume down immediately or you will damage your speakers! This type of
damage constitutes abuse and is not covered by warranty!
Tone controls and equalizers can demand even more power from an amplifier, lowering the
point at which it produces clipping distortion. Use them sparingly, if at all, and do not use them
when listening at loud levels.
8
Fig. 6
Fig. 7