DeLonghi DFP690 Series - Manuel (Page 8)

BEFORE YOUR FIRST USE
Carefully unpack your food processor and remove all
packaging material, including the plastic blade covers from the
blade assembly. Use caution when removing the plastic
covers, the blades are extremely sharp. These covers should
be discarded as they are to protect the blades during
manufacture and shipment. Remove any labels or stickers
from the food processor. To remove any dust that may have
accumulated during packaging, clean the food processor and
its included attachments thoroughly before using for the first
time. See “Cleaning Your Food Processor and Parts” section
of this manual for detailed instructions.
OPERATING YOUR FOOD PROCESSOR
1) Attach the drive shaft (2) to the power unit
(1). Then fit the bowl (4) to the drive
shaft, so that the drive shaft is in the
center of the bowl. Figure 1.
2) Fit an attachment over the drive shaft.
Use caution when attaching the blades,
they are very sharp. Be sure to always fit
the bowl and attachment onto the
machine before adding ingredients.
Figure 1
3) Fit the lid (5), ensuring that the top of the drive shaft is
centered inside the lid. Note: Do not use the lid to operate
the processor, always use the on/off or speed control
(10 or 11 depending on model). Figure 2.